How to read a marble technical data sheet
Density, water absorption, compressive and flexural strength, abrasion and frost resistance: what the values in a marble test report mean.
Updated:
Why it matters
Architects and contractors specify a stone from the values in a test report made by an accredited laboratory. Values vary from quarry to quarry and even from bed to bed in the same quarry, so always ask for the supplier’s own current report.
The main values
- Apparent density (EN 1936): mass per unit volume. Used to calculate structural load and freight weight.
- Water absorption (EN 13755): how much water the stone takes up. A low value means better resistance to staining and frost.
- Compressive strength (EN 1926): the load the stone carries before it crushes.
- Flexural strength (EN 12372): resistance to bending before breaking. Decisive for facade panels, stair treads and countertops.
- Abrasion resistance (EN 14157): how much the surface wears under foot traffic. Important for flooring.
- Frost resistance (EN 12371): loss of strength after freeze-thaw cycles. Needed for outdoor use in cold climates.
When you read a report
Check the report’s date, the standard it follows and the laboratory’s accreditation. Very different figures circulate online for the same stone; only a signed report on an identified sample can be the basis of a specification.
