Marble in bathrooms and hamams: use and care
How to use marble in wet rooms: which finish to choose, how to clean it and how to protect it. A short care guide.
Updated:
A hamam stone for centuries
Marmara marble is the traditional stone of Ottoman hamams: heated platforms, basins and floors have been made from it for centuries. It stands up to water and steam, and lasts for decades with the right finish and care.
Choose the right finish
Polished marble is slippery when wet. For wet floors choose a honed, sandblasted or bush-hammered surface. On walls and vanity tops a polished finish is fine.
Cleaning
Marble is calcium carbonate, so acids attack it. Vinegar, lemon, limescale removers and acidic bathroom cleaners etch the surface and leave dull marks. Use a pH-neutral cleaner and a soft cloth; avoid hard brushes and abrasive powders.
Protection
- After installation apply an impregnating sealer and renew it at the interval its maker recommends.
- Wipe up spilled shampoo, soap and cosmetics without delay.
- Rinse the surface with water after use and dry it to prevent limescale marks.
- Keep the joints sound; water should not get behind the stone.
